Categories
Information
X-1 HTMG
 Click to enlarge 
|
|
.jpg)
| Control System: | PWM Pulse Width Control |
| Processor: | MCU Program |
| Required Pulse: | 3 to 5 V Peak to Peak Square Wave |
| Working frequence: | 1520 μs /333 Hz |
| Rotation angle sensor: | Precision Potentiometer |
| Rotation: | Left Rotation: 50°, Right Rotation: 50° |
| Voltage: | 3.5V to 5.0V |
| Temperature Range: | -20℃ to 70℃ |
| Driver Type: | |
| Operating Angle: | 0 Deg. one side pulse traveling 0μs |
| Direction: | antiClockwise/Pulse Traveling 2100μs-900μs |
| Pulse Width Scope: | 900-2100μs |
| Neutral pulse: | 1500μs |
| Speed:(No-load ): | 0.52sec/ 60° @ 4.2V |
| 0.52sec/ 60° @ 4.2V | |
| Torque:(Stall Full load): | 0.45 kg . cm @ 4.2V |
| 0.45 kg . cm @ 4.2V | |
| Idle Current: | 0.010 A/ 4.2V 0.010 A/ 4.2V |
| Running Current: | 0.070 A/ 4.2V 0.070 A/ 4.2V |
| Stall Current: | 0.450 A/ 4.2V 0.450 A/ 4.2V |
| Dead Band Width: | 2μs |
| Motor Type: | |
| Bearings: | 2 Ball Bearing |
| Bearing Type: | MR74 (4mm x7mm x2mm) |
| 681X(1.5mm x 4mm x 1.2mm) | |
| Gear Material: | Chrome-Titanium alloy(7075+6061) |
| Servo case: | All aluminum alloy CNC |
| Plug: | |
| Connector Wire Length: | 90.00 mm |
| Connector Wire SPEC: | OD0.8mm/16 x 0.08mm 3p x 90mm (Jst1.25) |
| Weight: | 5.60 g |
| Dimensions (L x W x H): | 16.90*8.90*20.50 mm |