patented technology

DIGITAL SERVO

DIGITAL SERVO
Click to enlarge
DIGITAL SERVO
DIGITAL SERVO
DIGITAL SERVO
Status: In Production
Model: D5041MG-HV
Manufacturer: BLUEARROW

Control System: PWM Pulse Width Control
Processor: Digital IC
Required Pulse: 3 to 5 V Peak to Peak Square Wave
Working frequence: 1520 μs /333 Hz
Rotation angle sensor: Precision Potentiometer
Rotation: Left Rotation: 60° , Right Rotation: 60°
Voltage: 4.5V to 8.4V
Temperature Range: -20℃ to 70℃
Driver Type:
Operating Angle: 60 Deg. one side pulse traveling 600μs
Direction: Clockwise/Pulse Traveling 1500μs-2100μs
Pulse Width Scope: 900-2100μs
Neutral pulse: 1500μs
Speed:(No-load ): 0.04sec/ 60° @ 6.0V
0.37sec/ 60° @ 7.4V
Torque:(Stall Full load): 8.00 kg . cm @ 6.0V
10.00 kg . cm @ 7.4V
Idle Current: 0.050 A/ 6.0V 0.060 A/ 7.4V
Running Current: 0.300 A/ 6.0V 0.400 A/ 7.4V
Stall Current: 2.5 A/ 6.0V 2.9 A/ 7.4V
Dead Band Width: 2μs
Motor Type:
Bearings: 2 Ball Bearing
Bearing Type: MR106(6mm x 10mm x 2.5mm)
MR106(6mm x 10mm x 2.5mm)
Gear Material: Chrome-Titanium-Al alloy(7075)
Servo case: Upper/lower PA66 Mid aluminum
Plug:
Connector Wire Length: 300.00 mm
Connector Wire SPEC: OD1.5mm/60 x 0.08mm 3p x 300mm (JR)
Weight: 56.60 g
Dimensions (L x W x H): 40.00*20.00*37.50 mm