patented technology

DIGILTA MIBL SERVO

DIGILTA MIBL SERVO
Click to enlarge
DIGILTA MIBL SERVO
DIGILTA MIBL SERVO
DIGILTA MIBL SERVO
Status: In Production
Model: MIBL B20Air-1205MG
Manufacturer: BLUEARROW

Control System: PWM Pulse Width Control
Processor: Digital IC
Required Pulse: 3 to 5 V Peak to Peak Square Wave
Working frequence: 1520 μs /333 Hz
Rotation angle sensor: MAGNETIC INDUCTION ENCODER
Rotation: Left Rotation: 60° , Right Rotation: 60°
Voltage: 4.5V to 8.5V
Temperature Range: -20℃ to 70℃
Driver Type:
Operating Angle: 60 Deg. one side pulse traveling 600μs
Direction: Clockwise/Pulse Traveling 900μs-2100μs
Pulse Width Scope: 900-2100μs
Neutral pulse: 1500μs
Resolation: Minimum resolution:0.088°/0.9μs
Maximum resolution:0.350°/4μs
Rotational speed of magnet: Maximum 600RPM (r / min)
Magnetic offset: ±10mT
Magnetic input field amplitude: 45 to 75mT
Speed:(No-load ): 0.06sec/ 60° @ 6.0V
0.05sec/ 60° @ 7.4V
Torque:(Stall Full load): 10.00 kg . cm @ 6.0V
12.00 kg . cm @ 7.4V
Idle Current: 0.050 A/ 6.0V 0.055 A/ 7.4V
Running Current: 0.120 A/ 6.0V 0.130 A/ 7.4V
Stall Current: 1.8 A/ 6.0V 2.1 A/ 7.4V
Dead Band Width: 2μs
Motor Type:
Bearings: 2 Ball Bearing
Bearing Type: MR106(6mm x 10mm x 2.5mm)
MR106(6mm x 10mm x 2.5mm)
Gear Material: Chrome-Titanium-Al alloy(7075)
Servo case: Upper/lower PA66 Mid aluminum
Plug:
Connector Wire Length: 260.00 mm
Connector Wire SPEC: OD1.4mm/60 x 0.08mm 3p x 260mm (JR)
Weight: 53.00 g
Dimensions (L x W x H): 40.00*20.00*37.70 mm