2018

Digital


General Description: 

  • Digital Servo adopt a quartz crystal controlled microprocessor and FET amplifiers. 
  • The biggest feature is the digital servo input signal processing method: can be well controlled servo motors initial current, reducing non-reaction zone (no response to small signal control area), increased resolution, greater fixed force, adapt to different functional requirements, optimize application performance servos. 
  • Digital servos up to 300Hz-560Hz frequency power pulses sent to the motor. Higher than conventional analog servo frequency of 50Hz, each power pulse width is reduced, the motor excitation signal receiving more at the same time, the faster rotation. 
  • In order to optimize and reflect digital servo power pulse, our digital servo choice is Coreless motors and brushless motors. This allows us to achieve higher accuracy on the servo performance, smaller non-reaction zone, more accurate positioning; achieve faster control response of the control, faster acceleration, more torque average, greater fixing strength .

Typical applications:

  • Plane control surface actuation 
  • Helicopter Swash-plate control 
  • Helicopter Tail rudder control 
  • Throttle control 
  • Car rudder control
  • Boat rudder control
  • Robotics
  • Automation 
  • First Person View 
  • Wide angle stroke of rotation

10.0kg.cm 0.037sec/60° @7.4V 57g
10.0kg.cm 0.037sec/60° @7.4V 57g
D5041MG

27.0kg.cm 0.10sec/60° @7.4V 57g
27.0kg.cm 0.10sec/60° @7.4V 57g
D5042MG

18.0kg.cm 0.05sec/60° @7.4V 57g
18.0kg.cm 0.05sec/60° @7.4V 57g
D5040MG

30.0kg.cm 0.12sec/60° @7.4V 57g
30.0kg.cm 0.12sec/60° @7.4V 57g
D5043MG

32.00kg.cm 0.15sec/60° @7.4V 57g
32.00kg.cm 0.15sec/60° @7.4V 57g
D5044MG

7.0kg-cm 0.04sec/60° 7.4V 57g
7.0kg-cm 0.04sec/60° 7.4V 57g
NR5024MG

15kg-cm 0.10sec/60° 7.4V 57g 360° N-ROLL
15kg-cm 0.10sec/60° 7.4V 57g 360° N-ROLL
NR5026MG

22.0kg-cm 0.12sec/60° 7.4V 57g 360° N-ROLL
22.0kg-cm 0.12sec/60° 7.4V 57g 360° N-ROLL
NR5027MG

4.50kg.cm 0.06sec/60° @6.0V 28g
4.50kg.cm 0.06sec/60° @6.0V 28g
D2613MG

3.8kg.cm 0.06sec/60° @6.0V 25.0g
3.8kg.cm 0.06sec/60° @6.0V 25.0g
D2610

5.50kg.cm 0.11sec/60° @6.0V 27g
5.50kg.cm 0.11sec/60° @6.0V 27g
D2612MG

1.70kg.cm 0.04sec/60° @6.0V 14.5g
1.70kg.cm 0.04sec/60° @6.0V 14.5g
D1359HS

1